Carbon Monoxide Removal Catalyst ( Aerobic )

Filling Ratio:
Standard SV (/h):
Compressive strength:
Operating temperature:
Service life:
Decomposition rate:
Product packaging:

Product details description

Product Introduction

DBCAT carbon monoxide catalyst can convert carbon monoxide into carbon dioxide at normal temperature, avoiding equipment and personnel from being damaged by carbon monoxide. The catalyst adopts chemical synthesis method to manufacture active ingredients, and accurately controls each process parameter of the synthesis reaction. Aluminum oxide is used as a binder, and the active ingredient content is as high as 85%. The powder does not contain binders, and the active ingredient is as high as 99%. The catalyst does not contain activated carbon, can adapt to different working conditions, does not burn, has no volatility, which is safe to use, and does not cause secondary pollution.

Product Features

  1. The catalyst has high strength, and the average crushing strength is greater than 45N/cm;

  2. The specific surface area is high, with a specific surface area as high as 180-240m2/g. A large number of microporous structures are distributed inside the catalyst, which can effectively absorb carbon monoxide and carry out catalytic oxidation;

  3. The catalyst can withstand high temperature, does not contain flammable components and volatile components, there is no risk of burning at high temperature, which is safe to use, and will not cause secondary pollution;

  4. The content of active ingredients is as high as more than 80%, the performance is stable, the life is long, and it is not easy to lose;

  5. The specific gravity of the catalyst is low, and the high specific surface area makes the specific gravity of the catalyst only 0.68g/cm3, and the weight quantity of the catalyst required to process the same air volume will be reduced by 1/3;

  6. The raw materials and production process of the product are completely independent and controllable, and can be supplied stably for long-term.

Carbon Monoxide Removal Catalyst


  1. Purify carbon monoxide in refuge chambers, airtight compartments and respirators to avoid carbon monoxide poisoning;

  2. Purify carbon monoxide in air separation system and compressed gas, remove carbon monoxide at low temperature;

  3. Remove carbon monoxide from process gas;

  4. Remove the carbon monoxide in the flue gas, and realize the discharge of carbon monoxide up to the standard.

Product parameters

Carbon Monoxide Removal Catalyst Technical Data

TypeParticle Granule, Pellet Columnar, Powder, Honeycomb and Spherality Ball type

Active Effective Constituent85% min

Strength60 N/cm min

Specific Surface Area≥240 m2/g

Density0.75(±0.05) g/ml

Temperature0-500 ℃

Space Velocity1000-20000 /h

CO removal ability / Hour≥ 100.0 mg/g

CO Removal efficiencyCan reach 99.99%

Note: Catalyst specification parameters can be customized according to requirements.

Carbon Monoxide Removal Catalyst Packing & Delivery

General Packing: 25 KG/30 KG in iron barrel with moisture-proof plastic bag inside, Packing based on user's needs.

For quantity below 2 tons, DBCAT can deliver the Carbon Monoxide Removal Catalyst within 7 days.

Shipping Port: Shanghai/other port as request

Air transportation, ocean transportation, railway transportation and truck transportation are available.

Technical Support

  1. DBCAT can provide you with professional catalyst application consultation, and design a reasonable exhaust gas treatment solution based on Minstrong's high-performance catalyst;

  2. DBCAT can guide you in the design of process and equipment for free;

  3. DBCAT can provide you with the construction of test equipment, as well as the design, manufacture and installation of supporting catalytic reactors;

  4. DBCAT can provide you with on-site catalyst loading and debugging guidance.

Questions You May Care About

  1. How do I determine the specification and dosage of the catalyst?

  2. According to your working conditions, we can select catalysts with appropriate specifications and calculate reasonable dosages.
  3. How can I compare the cost of catalyst?

  4. Catalysts are not consumable materials, and are generally calculated according to volume. It is necessary to calculate the comprehensive cost of catalysts based on important factors such as specific gravity, catalytic efficiency, and service life, and at the same time assess the technical and service capabilities of suppliers to prevent after-sales risks.
  5. What should I do if I don’t know how to use the catalyst?

  6. We will design a reasonable process flow according to your working conditions, and provide you with one-stop services such as catalyst selection, test plan formulation, device design and manufacture, and on-site commissioning.
  7. How can I contact DBCAT?

  8. Email:
    Whatapp & Wechat: +8618664387376
    Mobile: 0086-18664387376